Mackie 808M PA

$2,783.00

MACKIE 808M MIXER-AMP AND 2 X C300 SPEAKERS

This is an American built model. More robust and the speakers sound better. The PPM 808M has everything you'll need for the gig. Each of the six mono channel strips feature XLR mic and 1/4 inch TRS line inputs, TRS insert jacks, monitor and effects send, 3-band EQ, and an input Trim control with individual level-set LEDs. And you wont need external effects, thanks to the EMAC 32-bit precision digital effects processor which sounds great and is as easy to use as a stompbox. There's even an Effects to Monitor control, so you can give your stage monitors a wet mix, totally independent of the Mains. The output section boasts two 600-watt FR Fast Recovery power amps, dual 9-band graphic equalizers, 75Hz rumble reduction filters, a switchable soft-knee compressor, and output level metering.

The ruggedly-built Mackie 808M 8-Channel Mono Powered Mixer is lightweight and easy to use. Twin 600W FR Series amps deliver 1,200 real watts @ 2 ohms and are switchable as mains or mains/monitors. The 8 mic/line channels feature phantom power, inserts on 1 through 6, and dual line inputs on channels 7 and 8. Each channel has 3-band EQ and separate, studio-grade 9-band graphic EQs are provided for mains and monitors. The graphic EQs feature multiple summing amplifiers and precision infinite feedback band-pass filters for superior linear phase and combining properties. They are ultralow noise, low distortion, and sound great. Rugged, injection-molded chassis. Sealed rotary controls resist dirt and dust.

Mackie 808M 8-Channel Mono Powered Mixer Features:

1,200 real watts @ 2 ohms from twin 600-watt FR Series High-Current power amps
Power amps switchable as mains or mains plus monitors
8 mic/line channels with phantom power
Dual line inputs on channels 7 and 8
Inserts on channels 1-6
Active 3-band EQ on each channel
2 separate 9-band, audiophile-quality graphic EQs -one on mains and one on monitors
Level-setting control and LED on every PPM mixer channel make setting input levels a snap

C300 speakers Key Features:

1.75 inch mylar HF compression driver
12 inch long-throw LF transducer
Can be used as stage monitor
Asymmetrical trapezoidal cabinet
Ten built-in hang points and built-in pole mount socket
Weight-balanced with two side handles and top handle for easy transportation and setup
Rugged impact-resistant molded enclosure
300-watt power handling
Mil-spec fiberglass circuit boards (instead of cheap phenolic) resist physical impact
Amp routing switch assigns power amps to mains or mains and monitors
Hefty storage capacitors for high peak power reserves
Massive toroidal transformer for high current output
Mega-cool die-cast heat sink.

This P.A. has had very little use, and has no visible marks or scratches.

Comes with heavy duty padded canvas covers for the mixer and speakers, plus 2 x stands, and leads, in a carry bag.










  • All prices include GST

    Model: 4041
  • 1 Units in Stock


This product was added to our catalog on Wednesday 20 July, 2011.

Your IP Address is: 23.20.129.162
Copyright © 2017 Mixmasters. Powered by Zen Cart